T-REX Multi-Flex Driver // 83 Piece Set
The T-REX Multi-Flex Driver is more than just a screwdriver. It's a truly ergonomic ratcheting multitool that utilizes your forearm strength to provide 10 times the torque of a standard driver without hurting your fingers or wrists. Secured between the index and middle fingers, it helps eliminate the risk of dropped tools and minimize potential rotating hand tool injury.
Weighing only 7 ounces, the incredibly durable T-REX features 72 carbon steel gear teeth mounted in a high-impact nylon unibody with a 600ºF melt point. It's extremely portable and requires no charge or electricity, so you can handle any job wherever you are—no power required.
The T-REX packs the same punch as a power tool without the risk of damaging your project from excessive torque. Thinner woods and brittle materials like PVC or acrylic can easily crack, split, and shatter when over torqued with a power drill or driver. Using the included titanium nitride-coated drill bits, the T-REX allows you to control the balance and torque so you can safely work with even more materials than before.
14"L x 9.5"W x 2"H
— Warranty: Manufacturer's Lifetime
— Versatile Hand Tool Set
— Truly Ergonomic Handle
— Durable & Impact Resistant Construction
— Minimizes Risk Of Dropped Tools & Rotating Hand Tool Injury
— Lightweight & Portable
— No Batteries Or Electricity Required
— T-REX Multi-Flex Driver: 7 oz
— Custom Box Set: 3.75 lb
— Custom Box
— Flex-Driver 72 Teeth (Directional) Steel Ratchet w/Patented 'T-REX' Nylon Handle
— 7 Additional Various Bits (in Rubber Carrier)
— Rubber Bit Carrier
— Quick Change Extension 1'4" Hex drive / Length 12"
— Flexible Shaft Bit Driver: Length 7"
— Magnetic Bit Holder / Length 2"
— 60mm Quick-Change
— 80mm Screw Drive
— 3 Nutsetters: 3/8", 5/16" & 1/4"
— 7 HSS-4241 Titanium Nitride Plated Drill Bits: 1/16", 5/16" , 3/32", 7/64", 1/8", 3/16", 1/4"
— 40 HRC-45-48 Bit / Slotted: 3, 4, 5, 6 & 7mm - Torx: T10, T15, T20, T25, T27, T30, T40 - Hex: 7/32", 1/8", 3/16", 9/64", 5/32", 1/4" & 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm - Square: 0mm, 1,mm 2mm, 2mm, 3mm - Phillips Head: #0, #1, #1, #2, #2, #2, #3 - Pozi: #0, #1, #2, #3
— (6) 2" Bits / Slotted: 5mm, 6mm - Phillips Head: #1, #2, #3 - Square: #2
— Bit Adaptor: Length 1 & 3/16"
— 6 Metric Sockets: 5mm, 6mm, 7mm, 8mm, 9mm, 10mm
— 6 SAE (Standard) Sockets: 1/4", 5/16", 11/32", 3/8", 7/16", 1/2"
— (4) 1-inch Rubber Bit Holders (Printed)
— 2-inch Rubber Bit Holder (Printed)
— Rubber Drill Bit Holder (Printed)
— 2 Rubber Socket Holders (Unprinted)
— 1 Rubber Nuttersetter & Quick-Change Holder (Unprinted)
The Titanium Nitride coated drill bits are for hand powered drilling on sensitive or brittle materials (PVC, Crown Moulding, Baseboards, Wooden Cabinetry & Brass Locks, etc...) that can be damaged by over-torquing power drills. The hand drill is also useful in areas, where electricity is non-existent or out due to natural or man made outages. At only 7 ounces; nothing beats the T-REX!How is it operated?
The T-REX is powered by simply flexing your forearm. The human forearm is designed by nature to flex and flex again (we do this inadvertently when we speak, we move and flex our forearms without even thinking about it). The T-REX's patented handle channels all this "flexing" energy from the handle into the driver. It's just that simple! And since it's a natural motion, the opportunity for carpal tunnel, trigger finger & arthritic flare up is radically decreased or eliminated entirely.What are the metal parts of the driver ratchet made from?
Both the Ratchet Driver and the 12-inch extension are robustly constructed, from HRC 60 Carbon Steel.Can you drill on masonry?
Yes & No! Yes, you can use the T-REX Multi-Flex Driver to drill masonry, however not with the Titanium Nitride coated bits that are included in the 83-piece box set. Concrete & Masonry bits can be purchased separately at your local Hardware store or online. T-REX TOOL Co. does not include or manufacture Concrete or Masonry bits for the T-REX Multi-Flex Driver.Are there alen wrenches included with this?
The T-REX Multi-Flex Driver 83 piece custom box set, includes Alen Wrench bits (aka Hex bits) in both Standard & Metric sizes. The T-REX Multi-Flex Driver makes using Alen's, as simple as flexing your forearm!Is the handle shock resistant?
No, the T-REX Handle is not shock resistant or rated for electrical use. The T-REX handle is made from High Impact Nylon and is not insulated to withstand electric shock. Nylon is an excellent conductor of electricity and unless properly insulated, it is not intended for use with live wires or electricity.Can the drill bits be used in an electrical drill.
Yes, all Drill Bits within the set may be used with any manufactures power drill.
Shipping AvailabilityUnited States (EXCEPT Alaska, Hawaii, Puerto Rico)
Shipping PolicyStandard Ground Shipping
Ship In1-5 business days
Return PolicyFinal sale, not eligible for return or cancellation